Charge Control C

Charge Control C is an IEC 61851 and ISO 15118 compliant charging controller, developed to work in every kind of AC charging station.

It is capable of the ISO 15118 control and proximity pilot signals as well as the PWM charging signal, conform to IEC 61851. It can directly control actuators like locking motors, contactors and ventilation. With its amount of general-purpose IO it can be connected to a variety of periphery.

Charge Control C comes with the standard interfaces to be connected to electric meters, RFID devices and different kinds of actuators and sensors.

• HomePlug Green PHY™ compatible QCA7000 Chip for control pilot communication
• HomePlug Green PHY™ compatible QCA7000 Chip for mains communication
• Filtered output for an auxiliary power supply to improve PLC performance
• Supported Standards: ISO 15118, Ethernet (IEEE 802.3), EIA-485 (RS-485), ARP, ICMP, IGMPv2, IPv4, IPv6, DHCPv4, TCP, UDP, HTTP, IEC 61851, IEC 60950-1, OCPP 1.6J
• Compatible with the OCPP 1.6j back end system be.ENERGISED (has.to.be)
• Network interface for Backend Connectivity: Fast Ethernet 100 Mbit/s and HomePlug AV GreenPHY 10 Mbit/s
• Running a Linux Operating System that allows you to adapt the behaviour of the charging station by writing your own control software around the charging stack.

Charge Control C is currently available in three different hardware variants (Charge Control C 100,  200 and 300) that are suitable for different complexity of charging stations.