Charge Control P

Legacy-Product with limited support. Not recommended for new designs.

DC charge controller for electric vehicles. CCS compliant, conform to DIN 70121 and ISO 15118 (PnC). Includes software stack.

ISO 15118 compliant controller for electric vehicle controller development and EVSE testing

The Charge Control P is designed for the prototyping and development of electric vehicle CSS compliant charging controllers. Our Linux-based software allows to build your own code top-layer. Charge Control P enables you to design specific functionalities and it can be used for testing DC or AC charging stations and controllers.

The proven EVAcharge SE hardware platform EVAcharge SE has been on the market for a while and is widely used in different charging stations and busses. Charge Control P comes with an EV charging stack for DIN 70121 and ISO 15118 and can be used for PWM charging. The Interfaces are controlled via CAN or MQTT.

If you are interested in a higher volume solution for serial use that you can easily integrate into your OBC or BMS, our product Charge Module S might be the right choice – a complete module with ISO 15118 SW stack that can be controlled via CAN. If you have further questions, please don’t hesitate to contact us.

New Product Development

  • Access Controller via Ethernet
  • Start with your controller already in early phases
  • Car simulation and capturing of PLC communication traffic
  • Test new EVSE specific features such like Plug and Charge and bi-directional charging or OppCharge

Customization

  • We put you into position to bring your own code to our device (Linux knowledge needed)
  • Your code interfaces with our software stack
  • Help with development of Add-On boards
  • Wi-Fi Add-On board available on request

Interfaces and Standards

  • Conform already to DIN 70121 and ISO 15118 with Plug and Charge (PnC)
  • Control pilot detection for CCS charging
  • Our EV software stack is driven by MQTT or CAN
  • Tracing of PLC traffic into PCAP files
  • Log file provides information on current charging states and charging sessions

Leave us a message!

Product inquiry

Charge Control P
Processor / Microcontroller
Freescale i.MX287 / KL02
Powerline Chip
Qualcomm QCA7000
Power Supply
12 V nominal (max. 7 – 27 V)
Storage Flash
4 GByte internal eMMC
Storage RAM
128 MByte DDR2
Interfaces
Ethernet, USB, CAN/RS232
Operating System
Linux
Temperature Range
-40 °C to +85 °C
Size
120 mm x 100 mm x 30 mm
Unit Price
Charge Control P
Processor / Microcontroller
Freescale i.MX287 / KL02
Powerline Chip
Qualcomm QCA7000
Power Supply
12 V nominal (max. 7 – 27 V)
Storage Flash
4 GByte internal eMMC
Storage RAM
128 MByte DDR2
Interfaces
Ethernet, USB, CAN/RS232
Operating System
Linux
Temperature Range
-40 °C to +85 °C
Size
120 mm x 100 mm x 30 mm
Unit Price

Downloads